2018+ Honda GL1800 HeliBars® Tour Performance™ handlebar risers

(17 reviews) Write a Review

NEW Gen 2 HeliBars® Tour Performance™ handlebar relocation adapters for the Honda GL1800 2018+ (all models)

Installs between the factory handlebar mounting clamp risers and the top triple clamp to reduce the reach to the grips. 

HeliBars has updated it's 2018+ Goldwing Tour Performance handlebar adapters to improve comfort and handling.  By removing the original "Sport" position from our adapters we gained the freedom to perfect our Touring position.  We have reduced the rear angle of the grips and adjusted the reach to offer improved comfort and handling performance.

  • 9/16" (14.2mm) Taller
  • 2 1/4" (57.15mm) Rearward
  • Bolt Cover caps now included!  Video
  • Reduction in rearward wrist angle
  • Heli Tour performance handlebar relocation adapters moves the factory bars into a more comfortable position by reducing reach.
  • All original cables and hydraulic lines are retained and are un-modified
  • Hard Coat Anodized
  • Increased leverage boosts confidence, improves low speed handling and makes the new Wing feel even lighter. 
  • Super precision adapters have drain holes in the recessed hardware mounting bores to eliminate corrosion from pooling water.
  • Does not interfere with the complex new front fork components
  • Template included for trimming the plastic top handlebar mount cover.
  • Video to reduce installation time:  #1 Install Video   and #2 Install Video WATCH CAREFULLY!  USE EXTREME CAUTION.
  • Exceptional build quality backed by a 30 day money back satisfaction guarantee

Add On Item:

  • Have the first generation risers? Looking for a cap to cover the handlebar mounting bolt?  Order here:  Caps

Full installation instructions are available to download prior to purchase should you wish to see them, if you are unable to find the instructions do not hesitate to contact us and we will happily provide them for you.


HeliBars® are designed for easy installation, in most cases retaining all original cables and hydraulic lines, and requiring little or no modification to your original equipment. They are made with pride by American Craftsmen and women, and are backed by a one year warranty on all materials and workmanship, as well as our 30 day money back guarantee if you are not completely satisfied.


HeliBars® provides motorcyclists with better handling ergonomics and greater long distance comfort without distracting from riding excitement. HeliBars research & development engineers are riders like you, and they take meticulous care to address all of your handlebars' deficiencies before they design the perfect fix for your bike. When you buy HeliBars®, you are benefiting from years of experience in riding comfort and performance!


At HeliBars® the focus for over 30 years has been helping motorcycle riders find their elusive comfort zone for all day riding no matter what style of bike they have. So when you are done for the day, you can stop because you want to, not because you hurt - this is what HeliBars® offers you, comfort without compromise!


  • 5
    Helibar Tour for 2020 DCT

    Posted by Al P. on Nov 22nd 2020

    First, fast transaction, thank you. Second, if you follow the instructions and the 2 videos, it is a breeze to install. It took me 45 mins complete. Was no need to raise the console. The caps are a nice finish. Put them in Hot water for 5 mins, open tabs slightly while warm and cool the caps off in cold water. They will not come off. Now, I have to say, big improvement riding with them installed. Hard to believe what few inches can do. A must have on the new Goldwings. Fit and finish are perfect !!!!!

  • 5

    Posted by Bruce Corson on Nov 5th 2020

    The result is great! Did just what I expected. I could use better directions, a better video. But, I hired someone to do it and it is just what I wanted.

  • 5
    Should have it from the 1st day

    Posted by Mohammad on Oct 21st 2020

    This product should rate it thousand star 5 is not enough ... found the comfort and the difference even when the bike off on it center stand .. this is the best investment in the bike recommended for every body

  • 5
    Simply amazing!

    Posted by Dan McLeod on Sep 12th 2020

    This is the best money I've spent on a modification for any bike I've owned! I just installed them and took a quick 30 minute ride. The difference is incredible. This is how a Wing should feel. Well done all!
    A special thanks to Tony for the non-DCT tip. Added a bit of time to the install, but was definitely worth it. Hopefully the instructions/videos will soon address the non-DCT cabling as well.

  • 5
    Adds comfort to your Wing

    Posted by S G Warnecke on Jul 24th 2020

    I'm a 5'8" woman. I have a 2020 DCT Tour Goldwing. The arm reach for me was okay but right on the edge of being too far away. I installed the HeliBars and they make a world of difference in the comfort. I now have a slight bend to my elbows and it feels like I'm in better control of it. Thanks to Harry for giving me some pointers over the phone! I so appreciate your product!! I rode 600 miles yesterday and I'm so glad I installed them. Thanks again Harry!!

  • 5
    HeliBars® risers for 2018+ GL1800

    Posted by Glenn on Jul 10th 2020

    This product was easier to install than I anticipated. It took me 90 minutes, working slowly and carefully. The YouTube video helped, but the instructions were excellent (18 pages with lots of pictures). My riding position is improved, with my hands closer to me, my arms more relaxed. and overall more comfortable. The risers were well made and fit perfectly with no play at all. I am happy with the quality of this product.

  • 5

    Posted by John M Boyd on Apr 30th 2020

    The caps come off and get lost. Glue them on or you will loose them.

  • 4

    Posted by Tony Cavagnaro on Apr 27th 2020

    I must say that i love the new position of the bars. But the installation on a GL1800 Tour NON DCT is not as easy as described! The issue is that on a non DCT the hydraulic line for the clutch and wiring harnesses for the throttle are not long enough as assembled. With that said if you try to assemble the handlbars on the risers you are stressing the clutch line and throttle wires too much. The difference between the DCT and non DCT is that the clutch line and wires to the throttle are on the same hold down. Since the wires for the Throttle handlebar come from the left side of the bike, the addition of the clutch lines moves those two harnesses further away from the throttle, therefore being too short. But.. if you disconnect the hold down and remove the tape for the wiring harness, the rubber grommet can be moved about a half an inch giving you enough room for installation without stressing the wires. The same can be done for the clutch hydraulic line. I am not sure if the grommets on all bikes are positioned exactly the same, but would think that for mass production they are very close.
    Anyway, it worked and i love the new riding position.

    Tony: Thank you for your very detailed install review. This was sent over to engineering.