HeliBars® TracStar™ handlebar risers for Kawasaki ZX10R 2016-onwards

SKU:
HELIBARS.TS04138-KC
$319.00
(1 review) Write a Review

HeliBars® TracStar™ replacement handlebars and risers for the Kawasaki ZX-10R 2016+

HeliBars model specific approach has turned out yet another unique TracStar design, to increase rider comfort while retaining excellent handling characteristics and feedback.

HeliBars® Kawasaki ZX10 handlebar replacement system specifications:

  • 1 1/2" (38mm) taller**
  • 1/2" (25mm) rearward**
  • 25 3/4" (654mm) width**
  • All stock cables and hydraulics retained
  • Durable UV resistant black powdercoat finish

 

**Please note that these are the true measurements taken at the wrist position, not at the fixing point or fork or triple clamp, the shape and angles of the HeliBars product give the final result required and indicated in the product description.

  • To better support the rider's weight the 20 degree downward angle of the stock clip-ons was reduced and rotated up to 6 degrees providing a more neutral wrist position
  • Positioned 1/2" higher at the fork tube, producing a total rise of 1 1/2" ... noticeably more comfortable yet still sporty
  • Handlebar width is increased by 1/2" to 25 3/4" inches overall
  • Factory damper weights are retained as are all original cables and hydraulic lines
  • Bar tubes have control housing locating pin holes for proper and accurate assembly
  • Machined from a solid 6061 aluminum billet, the new TracStar is both lightweight and extremely strong
  • This exceptional build quality is backed by a 30 day money back satisfaction guarantee

A new black finish has been applied to enhance the character of our new TracStar™ ZX-10R HeliBars®, and to compliment the ZX-10R frame's finish.

 

Full installation instructions are available to download prior to purchase should you wish to see them, if you are unable to find the instructions do not hesitate to contact us and we will happily provide them for you.

 

HANDCRAFTED IN THE USA:

HeliBars® are designed for easy installation, in most cases retaining all original cables and hydraulic lines, and requiring little or no modification to your original equipment. They are made with pride by American Craftsmen and women, and are backed by a one year warranty on all materials and workmanship, as well as our 30 day money back guarantee if you are not completely satisfied.

GREATER LONG DISTANCE COMFORT:

HeliBars® provides motorcyclists with better handling ergonomics and greater long distance comfort without distracting from riding excitement. HeliBars research & development engineers are riders like you, and they take meticulous care to address all of your handlebars' deficiencies before they design the perfect fix for your bike. When you buy HeliBars®, you are benefiting from years of experience in riding comfort and performance!

HELIBARS CELEBRATING OVER 27 YEARS:

At HeliBars® the focus for over 27 years has been helping motorcyle riders find their elusive comfort zone for all day riding no matter what style of bike they have. So when you are done for the day, you can stop because you want to, not because you hurt - this is what HeliBars® offers you, comfort without compromise!

 

Reviews

  • 3
    Hello Bars for 2016 ZX10R

    Posted by Scott on Mar 31st 2020

    The bars are well constructed. They will perform as expected with OEM controls. The problem is that you will not be able to upgrade to a new master cyinder, because there is literally no room for play. You also cannot add a remote brake adjuster for the same reason. If the bars were literally 1/4" longer, they would be perfect. I had to sand down the weld on mine to make them usable. I called Helibars to inquire about options, but was told firmly that this was the only bar or solution that they offer. I do not recommend if you are using any aftermarket controls.
    I removed Helibars and replaced with Attack Performance zero offset clip ons. Slightly lower, but better position for me anyway.

    HELIBARS NOTE:
    Thank you Scott for your honest feedback. We do advertise as a direct stock replacement. It is actually a CNC billet aluminum bar. (Not welded.) We know there are many options on the market for aftermarket accessories and couldn't possibly bring them all in house for fitment. We have been offering HeliBars for 30 years in this manner.